The Autopstenhoj MagiX 35 DS II BMW is a double scissor lift for bicycle and rapid service in car dealerships. The lift is suitable for lifting all BMW and MINI vehicles up to a load capacity of 3500 kg.
The lift can be installed on the ground (above ground) and, with the appropriate accessories, level with the floor (underground).
Note:
Raising the BMW i8 (i12) is recommended due to the vehicle's low ground clearance, only via the underfloor variant (floor-level).
Special features:
The hydraulic system of the lift, which consists of 2 independent circuits, does not require an external compressed air connection. An electronic continuous monitoring system stops the lift from a height difference of 50 mm.
To reduce regular maintenance costs, lubrication-free Teflon bearings are installed in all joints. A hot-dip galvanized base frame also ensures that the lift lasts a long time.
Optional accessories
778491
Ramp set - short (2 pieces) for MagiX 35 DS II
778492
Ramp set - short - galvanized (2 pieces) for MagiX 35 DS II
778483
Mounting frame, galvanized, for MagiX 35 DS II, for floor-level installation of the long version 2200mm
778484
Installation frame, galvanized, for MagiX 35 DS II (2100mm) 4 times short ramps, for installation of the short version flush with the floor
2100mm
778487
Hose extension set (extra) 1m for MagiX 35 DS II (no electric cables included)
778485
Hose extension 1 m extra for MagiX 35 DS II (electric cable included)
778486
Cable cover, 1000 mm for MagiX 35 DS II
758968
lighting set cpl. for MagiX 35 DS II for surface installation
778494
Counter bearing for ramps, MagiX 35 DS II L=2200, galvanized
778495
Counter bearing for ramps, MagiX 35 DS II short L=2100, galvanized
