The Sharklift 4.55 F480 BMW is an electrohydraulic 4-ram lift that is suitable for wheel alignment in car dealerships for particularly heavy vehicles, such as security vehicles. The lift is equipped with an omfortkit equipped. The comfort kit consists of pieces of trash that create a flat travel surface between the recesses of the turntables or sliding plates and thus allows safe and comfortable use of the lift. The filling pieces of different lengths are used to adjust and fix the turntables to the different wheelbases of all BMW and MINI vehicles. The lift can be installed in a floor-standing or flush-mounted variant with and without Floor levelling possible.
Special features:
The lift can be ordered with precision sliding plates as an option. The sliding plates replace the turntables, on which the rear axle of the vehicle to be measured is positioned. With sliding plates, there is no need to move turntables and filling pieces to adapt to different wheelbases.
The sliding plates and the filling pieces of the comfort kit are fixed via a toothed strip attached to the track.
Optional accessories
12310
Steel tray set SHL 4.65
21080
Electrical distribution for 1 track side (230 V / 16 A socket / IP54)
21081
Pneumatic installation SHL 4.65 for one lane, 1 piece each front & rear
21089
Axle jack A air-hydraulic, 2.6 t, incl. innovative air supply system, incl. side bolsters and supplementary assembly. For SHL 4.55 F550/480
21110
Axle jack A air-hydraulic, 3.2t, incl. innovative air supply unit, incl. side bolsters and extension kit. For SHL 4.55 (cyl. Ø213)
21075
Axle jack A air-hydraulic, 4t, incl. innovative air supply system
21119
Innovative air supply 4 ram lift F 480 for 2 axle jacks
21540
SHL compensation pieces, compensation pieces instead of sliding plates
for 2x 2100mm,(4 sliding plates)
21092
MKS bracket cpl. 1 set pluggable (runways 4.65 F480 / F550)1 set=4 pieces
